Yaesu FT-212 / 215 / 2200 / 712 / 715 / 7200 / 5100 / 5200 / 6200 USB CAT Cable
This cable is designed specifically for quick and easy programming and/or CAT control of the following Yaesu transceivers: FT-212H, FT-212L, FT-215, FT-215H, FT-215M, FT-2200, FT-2312, FT-712H, FT-712L, FT-715, FT-715H, FT-715M, FT-7200, FT-5100, FT-5200, FT-6200, etc. An external power supply is not required. Simply hook it up to USB port. The power supply is done over the USB interface, following the USB 2.0 specs. This programming kit is not a straight forward cable, there is an internal converter circuit board mounted in the USB plug. This cable is fitted with two 8-pin screw-on microphone plugs – one is female, another one is male. Both are wired in parallel through the special circuit. Female plug is connected to the radio’s microphone socket for CAT control via computer, and male plug is free to be connected to the microphone so that the user can use both – our interface-lead and microphone simultaneously. The cable communicates directly with a PC through the now popular and standard USB interface. It emulates a Serial Port but that port communicates with a radio at TTL voltage levels. A Serial Port connection is not needed since the cable emulates one for you. The cable is compatible with all versions of Windows® that support USB operation. Please click here to download necessary USB drivers. As usual a virtual Serial Port is created, so that any Windows™ based radio programming software that is compatible with your computer and radio may be used. This zipped file is completed with full installation instructions.